Vibration Analysis Services
Industrial vibration analysis for motors, pumps, fans, blowers, gearboxes, rotating machinery and other critical equipment.
Industrial Vibration Analysis
VibroTech Balancing provides vibration measurement and detailed analysis for rotating machinery to identify abnormal vibration behaviour, machine-condition changes and potential mechanical problems. Measurements can be evaluated in relation to machine speed, vibration amplitude, frequency components and operating conditions.
Vibration Measurement
Vibration measurements are collected at relevant machine locations and directions according to the equipment arrangement and diagnostic requirement. Typical measurement points include drive-end and non-drive-end bearing locations with vertical, horizontal and axial measurement directions.
- Overall vibration measurement
- Velocity, acceleration and displacement assessment
- Bearing-point vibration measurement
- Horizontal, vertical and axial measurements
- Machine-speed and frequency-related analysis
- Trend comparison for changing machine condition
What Vibration Analysis Can Identify
Frequency-domain and time-domain characteristics can provide useful evidence about the behaviour of rotating machinery. The interpretation depends on the machine design, operating speed, measurement location and observed vibration pattern.
- Rotor unbalance
- Shaft misalignment
- Mechanical looseness
- Bearing-related vibration
- Coupling and rotating-component issues
- Mechanical resonance and abnormal vibration behaviour
- Other machine-specific vibration conditions, etc.
VibroTech's Approach
Our approach combines measured vibration data with practical knowledge of rotating equipment. Machine speed, design, bearing arrangement, coupling configuration, operating condition and historical trends are considered when interpreting vibration behaviour. The objective is to turn vibration measurements into useful engineering information for maintenance and troubleshooting decisions.
Applications
- Industrial electric motors
- Pump impellers single/multistage
- Fans and blowers
- Gearboxes and coupled machinery
- Compressors single/multi stage
- Turbines and rotating equipment
- Marine and oil rig machinery
- Power-plant rotating equipment
Frequently Asked Questions
What is vibration analysis?
Vibration analysis measures machine vibration with sensors and examines the signal, usually as a frequency spectrum, to identify faults such as unbalance, misalignment, looseness and bearing defects before they cause failure.
Which faults can vibration analysis detect?
It is widely used to detect rotor unbalance, shaft misalignment, mechanical looseness, bearing defects, gear problems and resonance in motors, pumps, fans, blowers, gearboxes and compressors.
What is the difference between vibration analysis and balancing?
Vibration analysis finds the cause of abnormal vibration. Balancing corrects one specific cause, which is rotor unbalance. Analysis first helps confirm that balancing is the right fix.
How often should vibration measurements be taken?
It depends on how critical the machine is and its operating history. Critical machines are monitored more frequently than non-critical ones, and the interval is usually reduced when a fault trend appears.
How can I request a vibration analysis?
Call +91 84549 87213 or email vibrotechbalancing@gmail.com with the machine type, location and the problem you are seeing.
Need rotating-equipment engineering support?
Speak with VibroTech Balancing for industrial balancing, vibration analysis and rotating-equipment services.
CONTACT VIBROTECH